Replacement (75i) Skimmer Pump Impeller from Aqua One - (25075i)
This is a genuine and original specification replacment Replacement (75i) Skimmer Pump Impeller manufactured by Aqua One for use with AquaNano 36 protein skimmer filter pumps and will restore performance, should your impeller have become worn, or any of the impeller components damaged or lost
Replace every 12 months
Filter pump impellers work extremely hard and the 75i Impeller is no exception, spinning thousands of times per hour in your aquarium Filter Pump. For this reason we recommmend that you replace your 75i Impeller set every 12 months. Doing so will also help to preserve the working life of your Filter Pump.
Keep a spare pump impeller
It's both smart and inexpensive to keep a spare 75i Impeller set and this will help to head off unforeseen emergencies should your original 75i Impeller fail unexpectedly. Filter pump impellers are the only moving, serviceable part in your filter pump and work extremely hard, spinning thousands of times an hour. Wear and eventual failure are pretty much inevitable and we'd always recommend that you keep a spare to avoid unecessary downtime of your Filter Pump.
Filter Pump Maintenance
Once a week (or sooner if you notice reduced waterflow) check the filter pump impeller isn't blocked with aquarium waste and that it can spin freely. Pipework should be checked once a month to ensure that there are no blockages restricting waterflow and it's also good policy to check the condition of the filter media pads on a regular basis as these can sometimes become clogged over time. Rinse Black sponges in a little aquarium water and replace Polymer Wool Pads as necessary, usually every 4 to 6 weeks.
Replacing the 75i Impeller
Aqua One's filter pump impellers are reasonably easy to replace. First of all disconnect the power supply, then remove the suction cups that hold the pump in place and take the pump out of your aquarium. Clip off the impeller cover and remove the impeller. The 75i Impeller is magnetic and should be reasonably easy to remove. Install the 75i Impeller, check the impeller chamber is clear of debris and then reverse the above process to re-install the filter pump in your aquarium.
Need help?
If you have any questions regarding the 75i Impeller or are unsure of exactly which aquarium filter spares and accessories you require, please do contact us. We are the UK's leading authority on all that is Aqua One.
* See all Aqua One Filter Spares & Accessories
